\n3.<\/td>\n | A rag or towel<\/td>\n<\/tr>\n<\/table>\n Begin by locating the small lip or tab on the drain cover. This is the part that you will grip and turn to remove the cover. Use the pliers or adjustable wrench to get a good grip on the lip.<\/p>\n Once you have a good grip, twist the drain cover counterclockwise. This may take some force, so be sure to use steady pressure to prevent slipping and injury. Keep twisting until the drain cover begins to loosen.<\/p>\n Once the drain cover is loosened, you can remove it by simply lifting it out of the drain hole. Be careful not to drop the cover into the drain pipe, as this can create a more difficult situation to fix. If necessary, you can use a screwdriver to help pry the cover out.<\/p>\n After the drain cover is removed, it’s a good idea to clean it thoroughly before putting it back in place. Use a rag or towel to wipe away any dirt, grime, or hair that may have accumulated. This will help prevent clogs and ensure proper water flow.<\/p>\n To reinstall the drain cover, simply place it back into the drain hole and twist it clockwise until it is snug. Be careful not to overtighten, as this can cause damage to the cover or drain.<\/p>\n Removing a lift-and-turn drain cover is a relatively simple process that can be done with a few basic tools. Follow these steps and you’ll have your drain cover off and cleaned in no time!<\/p>\n |