Tips and Tricks to Prevent Your Washing Machine from Shaking and Vibrating

Have you ever experienced the frustration of a washing machine that shakes and vibrates violently during its spin cycle? Not only can this be annoying, but it can also cause damage to your machine and even your home. Fortunately, there are several steps you can take to prevent your washing machine from shaking and restore peace and quiet to your laundry routine.

1. Leveling the machine: One of the most common reasons why washing machines shake is because they are not properly leveled. To fix this, use a bubble level to check if your machine is even on a flat surface. Adjust the feet of the machine until it is completely level. This will help distribute the weight of the load evenly, reducing vibrations.

2. Stabilizing the machine: Another option is to stabilize the machine using anti-vibration pads or mats. These can be placed under each foot of the machine to absorb the vibrations and prevent them from transferring to the floor. These pads are affordable and easy to install, making them a popular choice for homeowners.

3. Minimizing the load: Overloading your washing machine can also cause it to shake. To avoid this, make sure you are not exceeding the recommended weight limit for your machine. It is important to distribute the weight of the load evenly. If necessary, remove some items and run multiple smaller loads instead.

4. Checking the drum: A loose or unbalanced drum can also lead to excessive shaking. To check if the drum is the issue, open the door and manually spin it. If you notice any wobbling or uneven movement, there may be a problem. Contact a professional technician to inspect and fix the drum to prevent further damage.

By following these simple steps, you can stop your washing machine from shaking and ensure a smooth and quiet laundry experience. Remember to regularly maintain and clean your machine to prolong its lifespan and prevent any future issues. Don’t let a shaking washing machine disrupt your home anymore! Take action today and enjoy a more peaceful laundry routine.

Reasons why a washing machine may shake

There are several possible reasons why a washing machine may shake during its operation. These can range from simple issues that can be easily fixed to more complex problems that may require professional help. Here are some common reasons why a washing machine may shake:

Uneven loading:Unevenly distributed laundry inside the drum can cause the washing machine to become imbalanced, leading to shaking. Make sure to evenly distribute the clothes before starting the wash cycle.
Improper leveling:If the washing machine is not properly leveled, it can cause it to shake. Check if all four legs of the machine are firmly and evenly touching the ground.
Worn or unbalanced drum:If the drum inside the washing machine is worn or unbalanced, it can cause vibrations and shaking. This can happen over time due to regular use or if heavy objects are frequently washed.
Problems with shock absorbers:The shock absorbers of a washing machine help stabilize the drum during operation. If these shock absorbers are worn out or damaged, they may not be able to effectively reduce the vibrations, resulting in shaking.
Loose components:There could be loose components within the washing machine, such as bolts or screws, that can cause the machine to shake. Check if any parts are loose and tighten them if necessary.

If your washing machine continues to shake despite addressing these common issues, it is advisable to contact a professional technician to inspect and diagnose the problem.

Uneven load distribution

One common cause of a shaking washing machine is an uneven distribution of the load. When the clothes inside the machine are not distributed evenly, it can cause the machine to become imbalanced during the spin cycle.

To prevent this, always try to distribute the clothes evenly around the drum. Avoid adding all the heavy items on one side and the light items on the other. Instead, mix them up to create a balanced load.

If you have a large and bulky item, such as a comforter or a large towel, it is best to wash it separately to avoid disrupting the balance of the load.

Another tip is to avoid overloading the machine. If the drum is packed too tightly with clothes, it can cause an imbalance and lead to shaking.

Finally, make sure to check the manufacturer’s instructions for your specific washing machine model. Some machines may have specific guidelines for load distribution and weight limits, which should be followed to prevent shaking and damage to the machine.

Leveling issues

If your washing machine is shaking excessively, it may be due to leveling issues. Uneven surfaces and imbalance can cause the machine to shake and vibrate. Here are a few steps to help you level your washing machine:

1. Start with a flat surface:Place your washing machine on a flat and stable surface. Avoid uneven floors or surfaces with gaps.
2. Adjust the leveling feet:Most washing machines have adjustable leveling feet. Use a wrench or pliers to raise or lower the feet until the machine is level. Check the machine with a bubble level to ensure it’s perfectly balanced.
3. Use a leveling tool:If you don’t have a bubble level, you can use a leveling tool specifically designed for washing machines. Follow the instructions provided with the tool to level your machine.
4. Check for solid footing:Make sure the machine is on a stable surface and doesn’t wobble when you push it gently. If it does, adjust the leveling feet again until it’s stable.
5. Test the machine:After adjusting the leveling feet, run a test cycle to check if the machine still shakes. If it does, repeat the leveling process until it’s stable during operation.

By following these steps and ensuring your washing machine is properly leveled, you can minimize shaking and vibrations, allowing for a smoother and quieter operation.

Damaged shock absorbers

If your washing machine is shaking excessively during the spin cycle, one possible cause could be damaged shock absorbers. Shock absorbers are responsible for minimizing vibrations and keeping the machine stable during operation. However, over time, these components can wear out or become damaged.

You can check if the shock absorbers are damaged by visually inspecting them for any signs of cracks or leaks. If you notice any visible damage, it is likely that the shock absorbers need to be replaced.

Steps to replace damaged shock absorbers:

  1. Unplug the washing machine from the power source.
  2. Locate the shock absorbers. They are typically found at the bottom of the machine, near the front or back.
  3. Remove any screws or clips securing the shock absorbers to the washing machine.
  4. Disconnect the shock absorbers from the washing machine by carefully pulling them off.
  5. Install the new shock absorbers by attaching them to the appropriate mounting points.
  6. Secure the shock absorbers in place with screws or clips.
  7. Reconnect the washing machine to the power source.

Replacing damaged shock absorbers can help reduce the excessive shaking of your washing machine and improve its stability during operation. If you are unsure about performing this repair yourself, it is recommended to consult a professional technician.

Worn-out drum bearings

Another common cause of a shaking washing machine is worn-out drum bearings. The drum bearings support the inner drum and allow it to rotate smoothly. Over time, these bearings can become worn-out or damaged, leading to vibrations and shaking during the spin cycle.

To check if the drum bearings are the cause of the problem, you can try manually rotating the drum. If you hear any unusual noises or feel resistance when turning the drum, it is likely that the bearings need to be replaced.

Replacing the drum bearings is a more advanced repair that may require the help of a professional. It involves disassembling the washing machine and accessing the drum assembly. If you are not comfortable with this type of repair, it is best to seek the assistance of a qualified technician.

If you decide to replace the drum bearings yourself, you will need to order the appropriate replacement parts. Consult the washing machine’s user manual or the manufacturer’s website for the correct part number. You will also need some basic tools such as a wrench, pliers, and screwdrivers.

Steps to replace worn-out drum bearings:
1. Unplug the washing machine and turn off the water supply.
2. Remove the top panel of the washing machine to gain access to the drum assembly.
3. Disconnect any wires or hoses connected to the drum assembly.
4. Use a wrench to remove the bolts securing the drum assembly.
5. Carefully remove the drum assembly from the washing machine.
6. Locate the old drum bearings and remove them from the drum assembly.
7. Install the new drum bearings into the drum assembly.
8. Reassemble the washing machine by following the steps in reverse order.
9. Test the washing machine to ensure that the shaking has stopped.

Remember to always refer to the washing machine’s user manual and follow safety precautions when working with electrical appliances. If you are unsure or uncomfortable with any aspect of the repair, it is best to consult a professional technician.

Loose or worn-out drive belt

If your washing machine is shaking excessively, another possible cause could be a loose or worn-out drive belt. The drive belt is responsible for spinning the drum, and if it is loose or worn out, it can cause the machine to vibrate excessively.

To check if the drive belt is loose, you’ll need to access the back of the machine. Make sure to disconnect the power before doing any work. Once you have access to the back, you can inspect the drive belt for any signs of wear or looseness. If it is loose, you can try tightening it using an adjustable wrench. If it appears worn out or damaged, it will need to be replaced.

Replacing the drive belt can be a straightforward process, but it may vary depending on the model of your washing machine. Consult the manufacturer’s instructions or seek professional help if you are unsure.

Avoid using the washing machine until the drive belt is fixed, as continued use can lead to further damage to the machine and potentially other components.

Excessive vibration from unbalanced tub

If your washing machine is shaking a lot during the spin cycle, it could be due to an unbalanced tub. This can happen if the load inside the machine is not distributed evenly.

To fix this issue, follow these steps:

  1. Stop the machine: If you notice excessive vibration, stop the washing machine and turn it off. This will prevent any further damage.
  2. Open the lid or door: Depending on the type of washing machine you have, open the lid or door to access the tub.
  3. Check the load: Look inside the machine and check if the load is balanced. If the clothes are all on one side or clumped together, redistribute them evenly.
  4. Remove some clothes: If the load is too heavy, the machine may not be able to handle it. Remove some clothes and try again.
  5. Use a level: Place a level on top of the washing machine to ensure that it is sitting level on the floor. Adjust the legs if necessary.
  6. Restart the machine: Once you have balanced the load and adjusted the machine, restart the washing machine and see if the excessive vibration has been resolved.
  7. Repeat if necessary: If the machine still vibrates excessively, repeat the steps above to ensure that the load is balanced and the machine is level.

By following these steps, you should be able to stop your washing machine from shaking due to an unbalanced tub. If the problem persists, it may be a sign of a more serious issue, and you may need to contact a professional for assistance.


Washing Machine Vibration & Shaking Solution!

YES! HUGE DEADLINE For Social Security INCREASE Coming…Social Security, SSI, SSDI Payments

Photo of author

Ryan Pietrzak

Ryan Pietrzak, a licensed plumber with 12+ years of experience, is the trusted expert behind Plumbing.Academy. With a wealth of practical knowledge, Ryan guides you through plumbing challenges, making informed decisions easier. His reputable advice, rooted in real-world expertise, empowers both DIY enthusiasts and seasoned plumbers.