Keeping your Kenmore refrigerator’s water filter up-to-date is essential for maintaining clean and fresh-tasting water. Over time, water filters become clogged with impurities and need to be replaced. Fortunately, replacing the water filter for your Kenmore refrigerator is a simple process that can be easily done at home.
To begin, locate the water filter on your Kenmore refrigerator. The location may vary depending on the model, but it is typically found either in the upper right corner of the fridge or in the base grille. Once you have located the filter, make sure to turn off the water supply to the refrigerator and unplug it from the power source for safety.
Next, remove the old water filter by turning it counterclockwise. You may need to use a filter wrench or a strong grip to loosen the filter. Be prepared for some water to spill out, so it’s a good idea to have a towel or bucket handy to catch any spills. Once the old filter is removed, dispose of it properly.
After removing the old filter, take the new water filter and remove any protective coverings. Insert the new filter into the filter housing and turn it clockwise to secure it in place. Make sure it is fully tightened to prevent any leaks. Once the new filter is securely in place, turn on the water supply and plug the refrigerator back in.
Finally, run a few gallons of water through the new filter to flush out any carbon particles or air bubbles. This will help ensure that you have clean and fresh-tasting water. Refer to your Kenmore refrigerator’s manual for specific instructions on how to reset the filter indicator light, as this may vary depending on the model.
By following these simple steps, you can easily replace the water filter for your Kenmore refrigerator and continue enjoying clean and refreshing water. Remember to regularly replace the filter to ensure optimal performance and water quality.
Why is it important to replace the water filter?
A water filter in a refrigerator is crucial for maintaining clean and fresh-tasting water.
Over time, the water filter tends to become clogged with impurities and contaminants, diminishing its ability to effectively filter out any harmful substances in the water.
By regularly replacing the water filter, you ensure that the water dispensed from your Kenmore refrigerator is of the highest quality and free from any potentially harmful contaminants such as lead, chlorine, and bacteria.
Furthermore, a clogged water filter can result in reduced water flow and poor ice cube production, impacting the overall performance and efficiency of your refrigerator.
Replacing the water filter on a regular basis not only ensures the health and safety of you and your family but also helps maintain the optimal functionality of your Kenmore refrigerator.
Step 1: Find the model number of your Kenmore refrigerator
Before replacing the water filter in your Kenmore refrigerator, you need to locate the model number. This number is essential for ensuring you purchase the correct replacement filter.
To find the model number, start by opening the refrigerator door and looking on the wall or ceiling of the fridge. The model number is typically located on a label or tag and may consist of a combination of letters and numbers.
If you cannot find the model number inside the fridge, you can also check the back or bottom of the appliance. Manufacturers often place model number labels in these areas for easy reference.
Once you have located the model number, write it down or take a clear photo of it. Make sure to double-check the number to ensure accuracy. Having the correct model number will help you find the appropriate water filter replacement for your Kenmore refrigerator.
Where to locate the model number?
Locating the model number of your Kenmore refrigerator is essential for finding the correct water filter replacement. The model number is typically located on a sticker or plate inside the refrigerator. Here are a few common places where you can find the model number:
1. Inside the refrigerator: Check the walls, ceiling, or on the back wall inside the refrigerator. Look for a sticker or a metal plate with the model number printed on it.
2. On the side wall or frame: Some Kenmore refrigerators have the model number printed on the side wall or frame of the appliance. Look for a label or engraving that includes the model number.
3. Behind the kick plate: In some cases, the model number may be located behind the kick plate of the refrigerator. The kick plate is the panel at the bottom front of the appliance that covers the leveling screws.
4. In the owner’s manual: If you still have the owner’s manual that came with your Kenmore refrigerator, the model number may be printed on the cover page or in the specifications section.
If you’re still unable to locate the model number, it’s recommended to check the Kenmore website or contact their customer service for assistance. Providing the model number when purchasing a water filter replacement will ensure that you select the correct one for your specific refrigerator model.
Step 2: Purchase a replacement water filter
Once you have determined the model number of your Kenmore refrigerator and the type of water filter it requires, it’s time to purchase a replacement. You can purchase a new water filter from various sources, both online and in-store.
One option is to visit the Kenmore website and use their Parts Direct feature. Simply enter your refrigerator’s model number and browse through the available water filters to find the one you need. Add it to your cart and proceed to checkout to complete your purchase.
Alternatively, you can visit a local appliance store or a home improvement store that specializes in refrigeration and plumbing supplies. Here, you can speak with a sales representative who can assist you in finding the correct water filter for your specific Kenmore refrigerator model. They can also help answer any questions you may have regarding installation or compatibility.
Before purchasing a replacement water filter, it’s important to check if there are any discounts or promotions available. Many retailers offer discounts when purchasing multiple filters or bundling them with other refrigerator accessories. Taking advantage of these deals can help you save money in the long run.
When purchasing a replacement water filter, make sure to choose a reputable brand that meets the quality standards set by Kenmore. This will ensure that you are getting a reliable and efficient filter that will effectively remove impurities from your drinking water.
Once you have purchased the replacement water filter, you are ready to move on to the next step in the process of replacing the water filter in your Kenmore refrigerator.
What type of water filter do you need?
When replacing the water filter for your Kenmore refrigerator, it’s important to make sure you use the correct type of filter. The type of filter you need will depend on the model and year of your Kenmore refrigerator, as well as your personal preferences.
There are two main types of water filters that are commonly used in Kenmore refrigerators: 1) the inline water filter and 2) the push-in water filter.
The inline water filter is a long, cylindrical filter that is typically installed in-line with the refrigerator’s water supply line. It is installed outside the refrigerator, usually behind the grille or in the basement. This type of filter is often preferred by those who want a larger capacity filter that requires less frequent replacement.
The push-in water filter, on the other hand, is a smaller, compact filter that is installed inside the refrigerator. It is typically located in the upper right-hand corner of the refrigerator compartment. This type of filter is often preferred by those who want a filter that is easy to access and replace.
Before purchasing a replacement water filter, you should consult your refrigerator’s owner’s manual or check the Kenmore website for the specific filter model number that is compatible with your refrigerator. This will ensure that you purchase the correct filter and that it will fit properly in your refrigerator.
- If you have an inline water filter, you will need to determine the correct filter size (usually based on the diameter and length of the filter) and type (such as activated carbon or reverse osmosis).
- If you have a push-in water filter, you will need to determine the correct filter model number and type (such as charcoal or sediment filter).
Once you have identified the correct filter for your Kenmore refrigerator, you can purchase it from a reputable appliance parts store or order it online. When replacing the filter, be sure to follow the manufacturer’s instructions for installation and use. This will ensure that the filter operates effectively and provides you with clean, fresh-tasting water.
Step 3: Turn off the water supply
Before you begin replacing the water filter for your Kenmore refrigerator, it is important to turn off the water supply to prevent any leaks or spills. Follow these steps to turn off the water supply:
- Locate the water valve.
- Turn off the water valve.
The water valve is typically found behind the refrigerator, near the floor. It may also be located in the basement or under the sink. Look for a small metal valve with a lever or knob.
Using your hand or a wrench, turn the lever or knob clockwise until it is fully closed. This will shut off the water supply to the refrigerator.
Once you have turned off the water supply, you can proceed with the next steps to replace the water filter. Make sure to follow the instructions specific to your Kenmore refrigerator model for safe and proper installation.
Locating and turning off the water supply valve
Before replacing the water filter for your Kenmore refrigerator, it’s important to locate and turn off the water supply valve. This will prevent any leaks or spills while you’re working on the filter replacement.
You can typically find the water supply valve behind the refrigerator, near the wall. Look for a small metal or plastic valve connected to a water line. It may be labeled with a “water supply” or “shut-off valve” sign.
If you’re having trouble locating the valve, you can refer to your refrigerator’s manual for specific instructions. Additionally, you can try looking for the valve underneath the sink or in the basement, as the water line may be connected to a different location.
Once you’ve located the valve, turn it clockwise to shut off the water supply. Make sure to turn it firmly but gently, as excessive force may damage the valve or the water line.
After shutting off the valve, you can test the water supply by dispensing water from the refrigerator’s dispenser. If no water comes out, you have successfully turned off the water supply.
Remember to always double-check that the water supply is properly turned off before proceeding with the water filter replacement. This will help prevent any water damage or accidents during the process.
Step 4: Remove the old water filter
Before installing a new water filter, you’ll need to remove the old one from your Kenmore refrigerator. Follow these steps:
Step 1: Locate the water filter housing. It is usually located in the upper right-hand corner of the refrigerator compartment.
Step 2: Open the filter housing door by pushing up on the latch or pulling down on the tab, depending on your specific model.
Step 3: Remove the old water filter by twisting it counterclockwise. Some models may require you to push a button or release a locking mechanism before the filter can be removed.
Step 4: Once the old filter is loose, pull it straight out of the housing.
Note: It is normal for a small amount of water to leak out when removing the old filter.
Step 5: Discard the old filter properly. Check the label on the filter for instructions on how to dispose of it responsibly.
